| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Warranty: | Half Year Without Huaman Damage |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
30m Tanktech T2000-Tfc-01 UTI Tape sensor ullage temperature interface uti tape
| Cable width | 12.5mm~13mm |
| Cable thickness | 0.75mm~0.85mm |
| Scale | one side metric one side british |
| Coating | ETFE |
| Cable length | 15/30/35m |
| Color | Yellow/White |
| Application | Ullage-temperature-interface Detector |
Accuracy
Application:
Battery: 9-Volt
Operation: U-Ullage, I-Interface (oil/water), T-Temperature.
The ullage detector of the UTI integrates two elements (1) electronic circuits and (2) two piezoceramic plates. When the sensor head reaches the oil or petroleum, an ultrasonic sound is emitted. The receiver processes and sends this sound to the instrument unit that emits a continuous beep sound.
The sensing component of the UTI detector is a Platinum Resistance Temperature Detector (RTD). This element is situated in the temperature electrode that is filled with a heat transfer compound paste to hasten the latency. After digitizing the RTD element signal, the micro-controller in the sensor probe corrects and compensates for any errors. The RTD element's attributes are saved in the sensor memory and are exclusively for that sensor, so a new calibration is not required when replacing the sensor. The micro-controller sends the data to the Display Unit that can be read by the technician.
The operating principle for oil-water interface level detection of the UTI detector involves measuring conductivity between an active electrode and a grounded electrode. When the liquid measured is conductive (e.g., water), the ullage sensor detects its existence. Afterwards, the conductivity electrodes and their related electronic circuits modify the coded signal generating an intermittent beep sound.
UTI meters can be either open or closed types, with the latter having a gas-tight body to prevent hazardous gases from escaping the measurement tank.
HERMETIC GTEX RTEX OTEX uti tape
GT3 MK3 UTI meter
MMC d-2401-2 uti tape
TANKTECH T2000-TFC-02 T2000-TFC-01 uti tape meter
MARSEN UTL-200 UTL-300 uti tape
){kind=link}