MMC D-2401-2 UTI Tape Replacement UTI Tape MMC 15m Spares UTI Meter Calibration

• Customization: Available
• After-sales Service: Available
• Warranty: Half Year Without Huaman Damage
• Model NO.: MMC
• Ruler Length: 0-15m
• Ruler Color: Yellow
• Coating: ETFE
• Conductor: Silver Plated Copper
• Lead Time: 3 Days
• Application: Ullage Temperature Interface Detector
• Transport Package: Carton
• Specification: 0-15m, 0-30m, 0-35m
• Trademark: no
• Origin: Shanghai, China
• HS Code: 8544491100
• Production Capacity: 50000
• Package Size: 25.00cm * 25.00cm * 6.00cm
• Package Gross Weight: 1.000kg
• Lead Time: 18 days (1 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

Product Description

MMC D-2401-2 UTI Tape Replacement UTI Tape MMC 15m Spares UTI Meter Calibration

Cable width	12.5mm~13mm
Cable thickness	0.75mm~0.85mm
Scale	one side metric one side british
Coating	ETFE
Cable length	15/30/35m
Color	Yellow/White
Application	Ullage-temperature-interface Detector

 

Specificities

 

Coating material resistance to chemical and acid.

High temperature resistance

Tank Gauging Tape MMC UTI Flexi Dip D 2401-2

Restricted and Open Gauging Tapes provide a convenient and accurate means for measuring ullage, product temperature and the oil-water interface. The units are configured to operate in the trimode, bimode, interface or temperature mode. Each instrument is designed to maximize ease of use. A single penetration of each tank can provide comprehensive data about internal tank conditions. When the electronic probe senses hydrocarbon, a steady tone is heard; when sensing water, it emits an intermittent tone. Temperature is shown on an LED display in the hub of the instrument.

Accuracy

• of Tape: +/- 1/8″ (+/- 3mm), +/- 0.01% of F.S. tape LGT (F.S. = Full Scale).
• of Temperature Display: +/- 0.5° F (+/- 0.2° C) +/- 1 digit error.
• of Calibration Range: 32° F (0° C) to 176° F (88° C).
• of Probe: For dryness to within 3/8 inch (10mm) of bottom.Ambient Temperature Limits

• LCD: same as above.
• Sensor: same as above.

Application

Application:

• Open gauging ("O" type) (Safe product vapors only).
• Restricted gauging ("R" type) via MMC vapor-control valve.
• 

Product Parameters

Battery: 9-Volt 
Operation: U-Ullage, I-Interface (oil/water), T-Temperature.

Coating material resistance to chemical and acid.

High temperature resistance

Coating material resistance to chemical and acid.

High temperature resistance
 

 

UTI (Ullage Temperature Interface) is a detector used to measure the ullage, temperature, and the oil-water interface onboard tankers. On this page, we examine the UTI functions, principles of working and the importance of its annual calibration. MMC's UTI gauging tapes are capable of detecting all floating and non-conductive hydrocarbons. Each instrument is designed for ease of use. Gauging for liquid or interface level is accomplished simply and quickly. When the electronic probe is lowered and senses a hydrocarbon, a steady horn tone is sounded and a yellow LED illuminates. When sensing an oil-water interface or a non-conductive liquid heavier than water, an intermittent horn tone sounds and a red LED starts flashing.
 

What is Ullage Temperature Interface (UTI)?

The UTI detector is a portable liquid level gauge that is commonly used in the shipping industry to measure the amount of hydrocarbons and chemicals in a ship's tank. This device includes a sensor probe, measurement tape, display unit, and winding drum. Its primary purpose is to determine the temperature and oil-water interface on tankers by attaching the sensor probe to the measurement tape, which can vary in length from 15m to 40m. Manufacturers offer a temperature range between -40°C and 110°C. All UTI meters have earth grounding capabilities for safety purposes.

Note: It is very important that the Ullage Temperature Interface system is grounded to the tank before the probe is introduced into the tank and remains grounded until after complete withdrawal from the tank.

 

UTI (Ullage, Temperature, Interface) is an ultrasonic measure that integrates 3 functions in 1: Measuring Ullage in the tank, Temperature temperature and oil/water interface. Combining the first 3 letters of 3 features should be called UTI. The device is used mainly on oil vessels, chemical vessels and general liquid cargo tank depots.
HERMETIC GTEX RTEX OTEX uti tape
GT3 MK3 UTI meter
MMC d-2401-2 uti tape
TANKTECH T2000-TFC-02 T2000-TFC-01 uti tape meter
MARSEN UTL-200 UTL-300 uti tape

 

 

Packaging & Shipping

 

FAQ

 

Q 1: I didn't find my needed model in this page.
Answer: Dear Friends, ecatalog will emailed to you asap when you contact with us. Also, we supply customization service. So, contact us !

Q 2: What's your Minimum Order Quantity?
Answer: Normally, 300m, but we also accept 100m order.

Q 3: When can I get the price and what's the validity?
Answer: usually within one day.Validity is 30 days

Q 4: What's your payment terms?
Answer: By T/T 30% in advance ; Balance 70% before shipment. 

Q 5: What's your delivery time?
Answer: It depends on whether we just have the stock for your type. Or, it takes about 10 - 30 days for normal orders.

Q 6: What's your package method ?
Answer: Usually, it's cartons, and for big cable, we use wooden drum.

Any other questions please contact with us freely:)