Tanktech T2000-Tfc-02 UTI Tape Replacement Tank Gauging Tape UTI Calibration Tape Meter

• Customization: Available
• After-sales Service: Available
• Warranty: Half Year Without Huaman Damage
• Model NO.: T2000-Tfc-02
• Ruler Length: 0-30m
• Ruler Color: Yellow
• Coating: ETFE
• Conductor: Silver Plated Copper
• Lead Time: 3 Days
• Application: Ullage Temperature Interface Detector
• Transport Package: Carton
• Specification: 0-15m, 0-30m, 0-35m
• Trademark: no
• Origin: Shanghai, China
• HS Code: 8544491100
• Production Capacity: 50000
• Package Size: 25.00cm * 25.00cm * 6.00cm
• Package Gross Weight: 1.500kg

Product Description

Product Description

Tanktech T2000-Tfc-02 UTI Tape Replacement Tank Gauging Tape UTI Calibration Tape Meter 

Cable width	12.5mm~13mm
Cable thickness	0.75mm~0.85mm
Scale	one side metric one side british
Coating	ETFE
Cable length	15/30/35m
Color	Yellow/White
Application	Ullage-temperature-interface Detector

 

Specificities

special characteristics

Coating material resistance to chemical and acid.

High temperature resistance

Tank Gauging Tape MMC UTI Flexi Dip D 2401-2

Accuracy

• of Tape: +/- 1/8″ (+/- 3mm), +/- 0.01% of F.S. tape LGT (F.S. = Full Scale).
• of Temperature Display: +/- 0.5° F (+/- 0.2° C) +/- 1 digit error.
• of Calibration Range: 32° F (0° C) to 176° F (88° C).
• of Probe: For dryness to within 3/8 inch (10mm) of bottom.Ambient Temperature Limits

• LCD: same as above.
• Sensor: same as above.

Application:

• Open gauging ("O" type) (Safe product vapors only).
• Restricted gauging ("R" type) via MMC vapor-control valve.

Battery: 9-Volt 
Operation: U-Ullage, I-Interface (oil/water), T-Temperature.

 

UTI (Ullage Temperature Interface) is a detector used to measure the ullage, temperature, and the oil-water interface onboard tankers. On this page, we examine the UTI functions, principles of working and the importance of its annual calibration. MMC's UTI gauging tapes are capable of detecting all floating and non-conductive hydrocarbons. Each instrument is designed for ease of use. Gauging for liquid or interface level is accomplished simply and quickly. When the electronic probe is lowered and senses a hydrocarbon, a steady horn tone is sounded and a yellow LED illuminates. When sensing an oil-water interface or a non-conductive liquid heavier than water, an intermittent horn tone sounds and a red LED starts flashing.

UTI (Ullage Temperature Interface) is a detector used to measure the ullage, temperature, and the oil-water interface onboard tankers. On this page, we examine the UTI functions, principles of working and the importance of its annual calibration.   

What is Ullage Temperature Interface (UTI)?

The UTI detector is a portable liquid level gauge that is commonly used in the shipping industry to measure the amount of hydrocarbons and chemicals in a ship's tank. This device includes a sensor probe, measurement tape, display unit, and winding drum. Its primary purpose is to determine the temperature and oil-water interface on tankers by attaching the sensor probe to the measurement tape, which can vary in length from 15m to 40m. Manufacturers offer a temperature range between -40°C and 110°C. All UTI meters have earth grounding capabilities for safety purposes.

Temperature Detection

The sensing component of the UTI detector is a Platinum Resistance Temperature Detector (RTD). This element is situated in the temperature electrode that is filled with a heat transfer compound paste to hasten the latency. After digitizing the RTD element signal, the micro-controller in the sensor probe corrects and compensates for any errors. The RTD element's attributes are saved in the sensor memory and are exclusively for that sensor, so a new calibration is not required when replacing the sensor. The micro-controller sends the data to the Display Unit that can be read by the technician.

Interface Detection

The operating principle for oil-water interface level detection of the UTI detector involves measuring conductivity between an active electrode and a grounded electrode. When the liquid measured is conductive (e.g., water), the ullage sensor detects its existence. Afterwards, the conductivity electrodes and their related electronic circuits modify the coded signal generating an intermittent beep sound.

What types of Ullage Temperature Interface (UTI) exist?

UTI meters can be either open or closed types, with the latter having a gas-tight body to prevent hazardous gases from escaping the measurement tank.


ULLAGE TEMPERATURE INTERFACE DETECTOR is necessary for cargo tanker and it is designed for measuring the ullage level, the oil-water interface level, the temperature sampling the cargo.
HERMETIC GTEX RTEX OTEX uti tape
GT3 MK3 UTI meter
MMC d-2401-2 uti tape
TANKTECH T2000-TFC-02 T2000-TFC-01 uti tape meter
MARSEN UTL-200 UTL-300 uti tape
 

Detailed Photos

 

Company Profile

 

Packaging & Shipping

 

Application

 

 

FAQ

 

Q 1: I didn't find my needed model in this page.
Answer: Dear Friends, ecatalog will emailed to you asap when you contact with us. Also, we supply customization service. So, contact us !

Q 2: What's your Minimum Order Quantity?
Answer: Normally, 300m, but we also accept 100m order.

Q 3: When can I get the price and what's the validity?
Answer: usually within one day.Validity is 30 days

Q 4: What's your payment terms?
Answer: By T/T 30% in advance ; Balance 70% before shipment. 

Q 5: What's your delivery time?
Answer: It depends on whether we just have the stock for your type. Or, it takes about 10 - 30 days for normal orders.

Q 6: What's your package method ?
Answer: Usually, it's cartons, and for big cable, we use wooden drum.

Any other questions please contact with us freely:)